SUBSOILERS
PINOCCHIO
37-118 kW (50-160 HP)
PINOCCHIO model, is designed for low or medium power tractors (from 50 to 160 HP), and is characterized by a maximum working depth of 45 cm. PINOCCHIO is available in different widths and shank number (from 3 to 7), just right for small or medium farms. The shanks are equipped with a safety system using shear bolts, while the double rear roller can be manually adjusted using a pin system.
ATTILA
80-147 kW (110-200 HP)
ATTILA model is suitable for medium power tractors (from 110 to 200 HP). Maximum working depth is 45 cm using from 5 to 9 shanks with different working widths, perfect for medium sized farms and farm contractors. This model has a safety system with shear bolt. Tillage depth is adjusted by the double rear roller with manual pin or hydraulic system.
ATTILA HYDRO
80-220 kW (110-300 HP)
ATTILA hydro-pneumatic model is suitable for medium power tractors (from 110 to 240 HP). Maximum working depth is 45 cm, different working widths are available, with number of shanks from 5 to 9. This model has a hydro-pneumatic safety system for use on stony soils. Tillage depth is adjusted by the double rear roller with hydraulic system.
ARTIGLIO
110-287 kW (150-390 HP)
ARTIGLIO model is suitable for high-power tractors (from 150 to 390 HP). Maximum working depth is 55 cm with different widths available, and configurations from 5 to 11 shanks. A new frame that is completely welded confers the best resistance to all stresses, shear bolts are the main protection for machine against impact with obstacles in deep layers.
ARTIGLIO HYDRO
110-250 kW (150-350 HP)
ARTIGLIO HYDRO is suitable for high-power tractors (from 150 to 350 HP). Maximum working depth is 55 cm with different widths available, and configuration from 5 to 9 shanks. Hydro-pneumatic safety device with nitrogen accumulator prevents damages to frame and reduces downtime resulting from shear bolts replacement: once the obstacle is overcome, the system brings the shank back to its working position.
ARTIGLIO MAGNUM
139-295 kW (190-400 HP)
ARTIGLIO MAGNUM model is suitable for high-power tractors (from 190 to 400 HP). Maximum working depth is 70 cm with different widths available, and configuration from 5 to 9 shanks. A new frame that is completely welded confers the best resistance to all stresses, shear bolts are the main protection for the machine against impact with obstacles in deep layers.
ARTIGLIO FOLDING
169-294 kW (230-400 HP)
SUBSOILER, FOLDING FRAME
ARTIGLIO FOLDING, with hydraulic closing system for a reduced transport width (2,55m) is available with 4 or 5 meters working widths, and 9 or 11 tines respectively. Thanks to the tough frame, it can be used with high-powered wheeled or tracked tractors. Thanks to 4 hydraulic cylinders, it can be closed in a few seconds.
DIABLO
TRAILED SUBSOILER WITH FOLDING FRAME (400-600 HP)
DIABLO trailed subsoiler is engineered to be matched with the most powerful tractors on the market today. The necessity for machines that exploit the great power of these tractors prompted the development of this model, combining high performance with great sturdiness.